Panasonic Digital Business System - Programming Manual
April 1997
Issue 15
91
Busy override (call intrusion) - originating
2.x
[BUSY OVERRIDE]
FF3-(001-144)#-8#-(0 or 1)#
0#: Break in not allowed
1#: Break in allowed
This sets whether an extension can originate a break in call or not.
Note: Busy override is not possible when the destination extension is set to reject it or by an
extension involved in a conference call.
Busy override (call intrusion) - receiving
2.x
[BUSY OVERRIDEN]
FF3-(001-144)#-9#-(0 or 1)#
0#: Break in call is rejected
1#: Break in call is accepted
This sets whether an extension can receive a break in call or not.
Break in-operator call intrusion
2.x
[ATT OVERRIDEN]
FF3-(001-144)#-10#-(0 or 1)#
0#: Operator break in is rejected
1#: Break in is accepted.
This sets whether to accept break in from the operator or to reject it.
FF3-(001-144)#-11# [NOT USED]
Prime line pick-up (auto exchange line seizure)
2.x
[PRIME LINE]
FF3-(001-144)#-12#-(0 or 1)#
0#: No prime line function
1#: To pick up prime line
It is possible to program an extension to seize an exchange line when the handset is lifted.
The exchange line to be used has to be programmed under the FF1 key. If line group access has
been set under the FF1 key, the highest available line in the group is selected.
Note:
When prime line pick up is set for an extension, that extension must have an intercom key
set to enable intercom calls to be made. (See FF Key Assignment).
