Panasonic Digital Business System - Programming Manual
April 1997
Issue 15
123
Registration of network carriers
2.x
[0:NOT SET 1:SET]
FF10-(PASSWORD)#-1#-(4-10)#-(0 or 1)#
(4-10)#
(0-1)#
4#: Carrier 1
0#: Not Used
5#: Carrier 2
1#: Used
6#: Carrier 3
7#: Carrier 4
8#: Carrier 5
9#: Carrier 6
10#: Carrier 7
Each network carrier to be used must be enabled. The system can use up to 7 carriers in addition
to the directly connected lines. In default Carrier 1 is used and its defaults are those required for
Mercury, carriers 2 to 7 are not used and have no default values set.
Assignment of network operators to lines
2.x
[0:NOT SET 1:SET]
FF10-(PASSWORD)#-2#-(01-48)#-(1-7)#-(0 or 1)#
(01-48)#
(1-7)#
(0-1)#
Line number
Carrier number
0#: Not assigned
1#: Assigned
MCL is assigned for every line in default
Network operators (carriers) are assigned to each line on which their service is available.
Storing access codes for each network operator
2.x
[ACCESS DIAL MODE]
FF10-(PASSWORD)#-3#-1#-(1-8)#-(0-9999999999)#
(1-8)#
(0-9999999999)#
1#: Carrier 1
Access code
2#: Carrier 2
maximum 10 digits
3#: Carrier 3
4#: Carrier 4
5#: Carrier 5
6#: Carrier 6
7#: Carrier 7
8#: Directly connected network
Each carrier the system uses can have an access code stored which is used to dial up the service
and for forcing calls via a particular carrier. In default carrier 1 is set for 131 , Mercury and the
direct network 8 for 121, BT. These can all be changed as required by programming.
