Panasonic Digital Business System - Programming Manual
April 1997
Issue 15
16
Internal tone/voice call (Extension)
2.x
[EXT CALL MODE]
FF1-2#-1#-9#-(0-2)#
0#: Call extension using internal ringing tone
1#: Call extension by voice
2#: Disable choice (always tone call)
When an extension is calling another extension, the call can be invoked by voice, internal ringing
tone, or set to tone call only by disabling the choices.
Note:
When using the Voice Announce Unit this step must be set to default (0#) for correct VAU
operation.
Alert tone in voice call
2.x
[SPT ON V-CALL]
FF1-2#-1#-10#-(0 or 1)#
0#: Alert tone does not sound for voice call
1#: Alert tone sounds for voice call
When using voice call mode, an alert tone (Splash tone ) can be sounded first for 0.5 seconds
from the called extension. Only applicable on voice calls.
Alert tone on conference call [Not Used]
2.x
[NOT USED]
FF1-2#-1#-11#-(0 or 1)#
0#: Alert tone not sent out for conference
1#: Alert tone sent out for conference
When beginning a conference call, an alert tone may be sent.
Alert tone during conference call
2.x
[CONFTONE ON/OFF]
FF1-2#-1#-12#-(0-1)#
0#: Alert tone not sent out during conference
1#: Alert tone sent out during conference
When on a conference call, an alert tone may be sent every 5 seconds.
System Speed Dial (SSD) directory display-name
2.x
[SSD DISP. MODE]
FF1-2#-1#-13#-(0 or 1)#
0#: Display 1 SSD name on 1 line
(5 names for 1 display)
1#: Display 2 SSD names on 1 line
(10 names for 1 display)
This specifies whether 1 SSD name or 2 SSD names appear on each line of the large display key
telephone.
Related Step FF3-17 ,PSD directory display -name",
FF1-2#-1#-14#- [NOT USED]