Panasonic Digital Business System - Programming Manual
April 1997
Issue 15
55
Default DDI Number
ISDN 1.0
FF1 6# 4# 5# (0-999999)#
This step is the default DDI number to be used when extensions which are not assigned a DDI
number make a call and the DDI is sent to line.
This step should not be used if there are non DDI channels conected to the system.
Related Step:
FF1 6# 5# (1-144)# 1# - DDI Number Setting
Sending DDI On Outgoing Calls
ISDN 1.0
FF1 6# 4# 6# (0-1)#
0# Do Not Send DDI Data
1#
Send DDI Data
The DDI data associate with an extension making a DASS II call can be sent to the network to
provide CLI at the receiving end. Extensions which have no DDI set use the Default DDI Number.
Related Steps: FF1 6# 4# 5# - Default DDI Number
FF1 6# 5# (1-144)# 1# - DDI Number Setting
DDI Ringing Pattern
ISDN 1.0
FF1 6# 4# 7# (1-3)#
1#
.375 sec On / .25 sec Off / .375 sec On / 2 sec Off
2# 1 sec On / .25 sec Off
3#
.25 sec On / .25 sec Off / .25 sec On / .25 sec Off / .25 sec On / 4.75 sec Off
Sets the ringing pattern for incoming DDI calls.
DDI Group Name Display
ISDN 1.2 / 4.1
FF1 6# 4# 8# (0/1)#
0# Name displayed
1#
Name NOT displayed
Selects weither the DDI group name is displayed on the second line of keyset LCDs curing DDI
incoming ringing.
Default DDI Number For Private Wire Groups
CPC-EX 1.0
FF1 6# 4# (9-11)# (0-999999)#
(9-11)#
Group
(0-999999)#
Default DDI Number
9#
Private wire group 1
CONF#
Clear
10#
Private wire group 2
11#
Private wire group 3
The DDI number for private circuit groups breaking out over DASS II can be specified here for use
when outgoing DDI data is required to be sent to the network.
