Panasonic DBS Series, Programming Manual

Page: 111 / 130

Panasonic Digital Business System - Programming Manual
April 1997 Issue 15
111
Dialling restriction on incoming line 2.x
[DIALING AT INCM]
FF7-1#-4#-(0 or 1)#
0#: Can Dial
1#: Dialling Restricted
This step controls the transmission of DTMF dialling out on an incoming call. This will prevent
otherwise barred users from generating calls following reception of an incoming call without
hanging up. If doorphones are used on this system this step must be set to o# to allow dialling to
trigger the lock mechanism.
Digit restrictions - Special Number 2.x
[SET MAX DIGIT]
FF7-1#-5#-(0,3 or 4)#
(0,3 or 4)#
0#: No digit restriction
(3-4)#: 3 or 4 digit restriction
This step sets the maximum number of digits which can be dialled when making calls to special
numbers. By default this step has no restriction set.
Digit restrictions - Local Calls 2.x
[LOCAL TRS TYPE (2-4)]
FF7-1#-(6-8)#-(0,3 or 4)#
(6-8)# (0,3 or 4)#
6#: Local calls - class 2 0#: No digit restriction
7#: Local calls - class 3 (3-4)#: 3 or 4 digit restriction
8#: Local calls - class 4
This step sets the maximum number of digits which can be dialled when making the specified type
of calls in the specified modes. By default these steps have no restriction set.
Digit restrictions - Long Distance Call 2.x
[LONG TRS TYPE(3-4)
FF7-1#-(9-10)#-(0,3 or 4)#
(9-10)# (0,3 or 4)#
9#: STD national - class 3 0#: No digit restriction
10#: STD national - class 4 (3-4)#: 3 or 4 digit restriction
This step sets the maximum number of digits which can be dialled when making the specified type
of calls in the specified modes. By default these steps have no restriction set.
Digit restrictions - Operator Service 2.x
[SP. TRS TYPE(2-4)]
FF7-1#-(11-13)#-(0,3 or 4)#
(11-13)# (0,3 or 4)#
11#: Operator service - class 2 0#: No digit restriction
12#: Operator service - class 3 (3-4)#: 3 or 4 digit restriction
13#: Operator service - class 4
This step sets the maximum number of digits which can be dialled when making the specified type
of calls in the specified modes. By default these steps have no restriction set.