System Planning
System Planning Forms and Guidelines
DBS-2.3/9.2-540
T1 Networking - Revised April 2000
Page 19
The actual trunk numbers used and the Network Trunk Group Numbers must
be determined for each DBS. In this example, each DBS has two sets of
trunks for network calls. These paths are assigned a Network Trunk Group
number (either Network Trunk Group 1 or Network Trunk Group 2) as shown
in Figure 2-6 below:
Figure 2-6. Example Network Trunk Group Configuration
DBS 1
DBS 2
DBS 3
DBS 4
1XXX
2XXX
3XXX
4XXX
Network Trunk
Group 2
Network Trunk
Group 1
Network Trunk
Group 1
Network Trunk
Group 2
Network Trunk
Group 2
Network Trunk
Group 1
Network Trunk
Group 1
Network Trunk
Group 2
Summary of Contents for DBS Section 540
