Panasonic DBS Section 540 Reference Manual Download Page 116

Page: 116 / 146

Network Conference Calls

Network Feature Operation

Page 116

T1 Networking - Revised April 2000

DBS-2.3/9.2-540

To add an extension to an outside call:

1. Press

the

HOLD

key during the outside call.

2. Dial the additional party.

3. After the extension answers, press

CONF

The three parties can now speak to one another.

4. Repeat steps 1-3 to add another extension to a three-party Conference

Call.

To establish an Unsupervised Conference Call:

1. Press

HOLD

or the line key of your current call to place it on hold.

The outside line number or name of the party on hold appears on the
display.

2. Press an unlit line key.

• The line LED lights green.

• The phone issues outside dial tone.

• “CO TALK #XX” (where “XX” is the line number) appears on the

display.

3. Dial the number of the party you wish to add to the call.

4. Press

the

CONF

key when your call is answered.

“CONF #XX #YY” (where “XX” is the first line and “YY” is the second
line) appears on the display.

5. To drop out of the conference and establish the Unsupervised Conference

Call, press

HOLD

6. To return to the call, press one of the conference line keys.

Related Programming

• FF1 (System): Unsupervised Conference Timer

• FF2 (Trunk): Unsupervised CO Conference

• FF3 (Extension): Unsupervised Conference

Summary of Contents for DBS Section 540



















































































































































Search results

Summary of Contents for DBS Section 540

Reviews:

Related manuals for DBS Section 540

Brands by name

Popular brands

Panasonic DBS Section 540, Reference Manual

Search results

Summary of Contents for DBS Section 540

Reviews:

Related manuals for DBS Section 540

Brands by name

Popular brands