Panasonic DBS 576HD Technical Manual Download

Page: 283 / 370

Section 700 - Operation

Chapter 7. SLT Features

576-50-700

DBS 576HD (USA) issued September 2001

7-7

You can call the attendant group from any extension by dialing the designated attendant number.

Operation

To call an attendant group:

Hardware Requirements

•

N/A

Related Programming

•

FF1-2: Dial Plan

•

FF3-0: Extension Number

•

FF5-0: Attendant Hunt Groups

Considerations

•

Up to 20 extensions can be included in an attendant group.

•

The attendant pilot number is flexible.

•

If a member of an attendant group is for a virtual extension, multiple extensions in the attendant

group can be made to ring at once when the virtual number is dialed.

•

Attendant calls are always tone calls (i.e., not voice calls).

Busy Override

Description

Busy Override allows you to break into another user’s outside or intercom calls to relay urgent

information or to create three-party conference calls.

Operation

To set Extension Busy Override:

Action

Result

1. Lift the handset.

Intercom dial tone

2. Enter the attendant pilot number (default =

Action

Result

1. Lift the handset.

Intercom dial tone

2. Dial the extension number.

Busy tone

3. Enter the Busy Override code (default =

• Alert tone sounds to both extensions

(System programming required)

• Connection to both parties

Summary of Contents for DBS 576HD



















































































































































































































































































































































































Search results

Summary of Contents for DBS 576HD

Reviews:

Related manuals for DBS 576HD

Brands by name

Popular brands

Panasonic DBS 576HD, Technical Manual

Search results

Summary of Contents for DBS 576HD

Reviews:

Related manuals for DBS 576HD

Brands by name

Popular brands