Panasonic DBS 576HD Technical Manual Download

Page: 132 / 370

5-10

DBS 576HD (USA) issued September 2001

576-50-700

Chapter 7. SLT Features

Section 700 - Operation

Hardware Requirements

•

N/A

Related Programming

•

FF1-0-03: Extension COS (Auto Repeat Dial)

•

FF3: Extension COS Assignment

Considerations

•

N/A

Background Music

Description

If your System is set up to provide Background Music, music can be played from the speakers of idle

telephones. If a call is made to an extension receiving Background Music, the music stops and the

phone rings. Background Music is also interrupted when the phone goes offhook.

The System can also provide Music-on-Hold (MOH) using a separate music source (except with

CPC-HS). If MOH is provided, callers automatically hear music when they are placed on hold. (For

more information on MOH, see page 3-37.)

Operation

To turn Background Music on:

To turn Background Music off:

3. Dial the phone number.

• Dialed phone number displays
• Busy tone

4. Press the

REDIAL

key.

System automatically redials number

Action

Result

1. Lift the handset or press the

ON/OFF

key.

Intercom dial tone

2. Enter the Background Music code (default =

*30

BGM ON

displays

3. Replace the handset or press the

ON/OFF

key.

Action

Result

1. Lift the handset or press the

ON/OFF

key.

Intercom dial tone

2. Enter the Background Music code (default =

*30

BGM OFF

displays

3. Replace the handset or press the

ON/OFF

key.

Action

Result

Summary of Contents for DBS 576HD



















































































































































































































































































































































































Search results

Summary of Contents for DBS 576HD

Reviews:

Related manuals for DBS 576HD

Brands by name

Popular brands

Panasonic DBS 576HD, Technical Manual

Search results

Summary of Contents for DBS 576HD

Reviews:

Related manuals for DBS 576HD

Brands by name

Popular brands