Panasonic DBS 576HD Technical Manual Download

Page: 81 / 370

Section 700 - Operation

Chapter 7. SLT Features

576-50-700

DBS 576HD (USA) issued September 2001

3-63

To use a Voice Mail Transfer key:

Once a call is sent to the voice mail, after the voice mail answers, the system sends the VM Transfer

ID 1 or 2 + the extension number (BLF/DSS, Directory or dialed number).

Hardware RequirementsN/A

•

N/A

Related Programming

•

FF4 (FF Key Programming): FF Key Assignments

•

FF1-0-24: Voice Mail Transfer ID Code

Considerations

•

The VM/TRF key can be assigned to any key phone, DSS/72 or EM/24. The VM/TRF key

cannot be assigned to a one-touch key.

•

The VM/TRF key can be used to transfer intercom as well as CO calls to a voice mailbox.

•

The Voice Mail Transfer ID codes are assigned in the Maintenance Programming section. Up to

ten digits can be stored.

•

The system responds to key operations during the transfer in the following ways:

• Pressing the

FLASH

key cancels the VM/TRF and returns intercom dial tone to the

user. When the VM/TRF is cancelled, the incoming call is still connected but is on

hold.

• If a valid key (CO key or second DSS key, for example) is pressed, the VM/TRF is

cancelled and the operation invoked by the key is performed.

• If an invalid key (

REDIAL

, for example) is pressed, the VM/TRF is cancelled, and the

user receives busy tone.

• Once VM/TRF is pressed, the user can dial up to 10 digits before completing the transfer.

•

If a user begins to perform the voice mail transfer and the extension cannot hold a call (one call is

already on non-appearance hold, for example), the system will keep the call in the talk state and

will not allow the voice mail transfer to be initiated.

8. Press the

HOLD

key.

9. Replace the handset or press the

ON/OFF

key.

Action

Result

1. Lift the handset or press the

ON/OFF

key to answer the

incoming call.

Connected to caller

2. Press the

VM/TRF

(1 or 2) key.

System places caller on hold

3. Press the DSS/BLF key, dial an extension number or select

the extension from the extension directory on the large dis-
play telephone.

4. Replace the handset or press the

RELEASE

ON/OFF

, or

PROG

key.

Action

Result

Summary of Contents for DBS 576HD



















































































































































































































































































































































































Search results

Summary of Contents for DBS 576HD

Reviews:

Related manuals for DBS 576HD

Brands by name

Popular brands

Panasonic DBS 576HD, Technical Manual

Search results

Summary of Contents for DBS 576HD

Reviews:

Related manuals for DBS 576HD

Brands by name

Popular brands