Panasonic DBS 576HD Technical Manual Download Page 97

Page: 97 / 370

Section 700 - Operation

Chapter 7. SLT Features

576-50-700

DBS 576HD (USA) issued September 2001

4-15

Hardware Requirements

•

N/A

Related Programming

•

N/A

Considerations

•

N/A

Set Mode Schedule

Description

(For a description of Automatic Day/Night System Mode, see “Automatic Day/Night Mode” on page

3-26.)
You can set the System to automatically enter None, Day 1, Day 2, Night, Night (1), or Night (2)

modes based upon mode patterns. You can define up to 3 patterns with up to 5 modes for each day.

(This menu allows the setting of the patterns.)

7. Enter the Message Key ID code.

Notes:

The ID code may contain up to 16 digits and contain

, pause (

REDIAL

key).

To clear an entry or existing data, press the

FLASH

key.

8. Press the

HOLD

key to store the entry.

Next extension number displays

9. To set additional Message Key ID codes, press the volume

up or down key or press the

HOLD

key to move to the

desired extension.

Desired extension number displays

10. Repeat steps 7-9 until all Message Key ID codes are set.

11. Press the

AUTO

key to exit the entry mode.

MSGID - EXT Number

displays

12. To return to the top menu level (

), press the

PROG

key.

OR...

To exit the User Maintenance mode, press the

ON/OFF

key.

81-

User MAINT

displays

OR...

ON/OFF

LED goes off

Action

Result

Summary of Contents for DBS 576HD



















































































































































































































































































































































































Search results

Summary of Contents for DBS 576HD

Reviews:

Brands by name

Popular brands

Panasonic DBS 576HD, Technical Manual

Search results

Summary of Contents for DBS 576HD

Reviews:

Brands by name

Popular brands