Care & CLeaninG
Care & CLeaninG
AIR FILTERS
• It is recommended to clean air
filters once every 2 weeks.
• Wash/rinse the filters gently with
water to avoid damage to the filter
surface.
• Dry the filters thoroughly under
the shade, away from fire or direct
sunlight.
• Replace any damaged filter.
FRONT PANEL
Raise and pull to remove. Wash gently and dry.
Remove
wASHING INSTRUCTIONS
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
INDOOR UNIT
Wipe the unit gently with
a soft, dry cloth.
• Clean the filter regularly for best performance and to
reduce power consumption.
• Please consult your nearest dealer for seasonal
inspection.
note :
• If chemical cloth is used to wipe the unit, instruction for
the cloth should be followed.
HintS
FOR SEASONAL INSPECTION AFTER EXTENDED
NON-USE
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• After 15 minutes of operation, it is normal to have the
following temperature difference between air inlet and air
outlet vents:
Cooling: ≥ 8°C
Heating: ≥ 14°C
NON SERvICEAbLE CRITERIAS
TURN OFF POWER SUPPLY AND UNPLUG then CALL
Authorized Distributor under the following conditions:
• Abnormal noise during operation.
• Water/foreign particles have entered the remote control.
• Water leaks from Indoor unit.
• Circuit breaker switches off frequently.
• Power cord becomes unnaturally warm.
• Switches or buttons are not functioning properly.
• The timer indicator blinks and the unit can not be operated.
FOR EXTENDED NON-USE
• Activate heat mode for 2~3 hours to thoroughly dry the unit.
• Turn off the power supply and unplug.
• Remove the remote control batteries.
ALUmINIUm FIN
Caution
•
Switch off the power supply and unplug before cleaning.
•
Do not touch the aluminium fin, sharp part may cause injury.
F566018_EN.indd 6
2008-2-18 9:43:25
