Panasonic CS-G125KE CU-G125KE, Service Manual, Page: 54 / 114

B
REM
OTE
CO
NTR
OLL
ER A
Operating the remote control
●
The maximum distance at which signals can be
received is about 10 m.
●
Aim the remote control at the signal receptor on
the room air conditioner when operating.
●
Make sure that the signal path is not obstructed.
Batteries
POWER
LOW HIGH
SLEEP TIMER
POWERFUL
POWER MONITOR
(2 pcs R03 dry-cell batteries)
The batteries can be used for approximately one
year.
Observe the following when
replacing the batteries
●
Replace the batteries with 2 new batteries of
the same type.
●
Do not use rechargeble batteries (Ni-Cd),
because they are different from standard
dry-cell batteries in shape, dimensions and
performance.
●
If the unit is not going to be used for an
extended period of time, remove the
batteries from the remote control.
1
Gently press the
place marked OPEN
and slide the cover
towards you.
2
Be sure that the
e
and
r
directions are
correct.
●
Confirm that the display is flashing 12:00 PM. If
the display does not appear when the batteries
are inserted, remove them and re-insert.
●
To prevent battery exhaustion , set the current
time (CLOCK) immediately.
PM
1
2
3
Press the Clock button.
PM flashes and 12:00 lights up.
Press or to set the current
time.
Press continuously for fast for-
warding and for fast reversing.
Press the Clock button.
AM or PM lights up.
Notes
●
Do not throw or drop the remote control. Do
not let it get wet.
●
Certain types of fluorescent lamps may af-
fect signal reception. Consult your dealer.
Remote control
Inserting batteries
PM
PM
PM
Setting the clock
54
S-G95KE CU-G95KE / CS-G125KE CU-G125KE