![background image](http://html1.mh-extra.com/html/panasonic/cn-dv1800en/cn-dv1800en_installation-instruction_3463153009.webp)
N
t
Power Connector
Cut here
ILLUMINATION
Illumination lead (4m)
i
Orange/white
j
!1
Clip Type Connector
To the power supply for
vehicle lighting
To the the vehicle battery,
cont12V DC
BATTERY 5A
Battery lead (5 m)
(Yellow)
5 A
ACC
Panasonic
Accessory lead (5 m)
(Red)
To ACC power, +12V DC
Ground lead (2m)
i
Black
j
To clearn, bare metallic part of the
vehicle chassis
POW
ER
Receiver lead (3 m)
RM-DATA
Infrared Receiver lead
(4 m)
(Black)
Navi Mute lead (5m)
(Orange)
For use with Panasonic audio systems
provided with NAVI Mute function.
For details refer to the operating instructions
of your audio system.
NAVI MUTE
To NAVI Mute/Telephone Mute
of audio reciever
(Black/green)
SPEAKER
Not Used
Speaker Cord (0.25 m)
(Black)
Infrared Receiver (option)
This receiver is required to connect a monitor
other than Panasonic’s.
ENGLISH
9
Cautions:
If noise is generated in proportion to engine revolutions, the earth conductor of the navigation power
cord and that of the monitor unit should be connected to the same place of the metallic block of the
car body. Take the same action if the brightness of navigation screen is not constant.
Note:
To connect any lead of the power connector to any lead of the vehicle wiring harness, cut off
the terminal and use the clamp type connector supplied instead.
Do not cut the speed pulse lead or the remote control lead.