ENGLISH
6
Note
:
Disconnect the cable from the negative (–) battery terminal.
Attach the L-Shaped Brackets
!0
on both
sides of the unit with the Tapping Screws
with Washers
q
.
Unit
!0
L-Shaped
Brackets
q
Tapping
Screws with
washers
w
Tapping
Screws
Secure the rear of the unit.
a) Check the electrical connections by
referring to this operating instructions.
b) Insert Power Connector
t
to the unit.
After installation, reconnect the neg-
ative (–) battery terminal.
Attach the double-sided tape
!4
to the back of the
Remote Control Holder
u
.
Remove the backing from the double-sided tape, then
press the Remote Control Holder
u
onto the surface
where you want to attach it.
Put the remote control
i
in the holder.
Note:
Place the Remote Control Holder where it will not
interfere with driving.
Installation Procedure - Navigation System
Attaching the Remote Control Holder
Precautions
We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
q
e
w
Install the unit with Tapping Screws
w
.
q
w
q
w
e
r
q
w
e
w
q
e
t
Power
Connector
i
Remote Control
Unit
u
Remote Control
Holder
!4
Double-Sided
Tape
