background image

ENGLISH

5

Cautions

Notes:

¡

It is natural that the unit becomes warm during prolonged use.

¡

The unit may not function properly if installed in a location where it is exposed to high
temperature such as in the trunk. Preferably install it in the driver's compartment.

Install the main unit on a firm base inside the driver's compartment, such as on the floor or in the con-
sole box. Any changes in its position may cause the position of your vehicle to deviate in the screen.

Choose the location for installing the main unit so that it is easy to reach it for inserting and removing
the map DVD-ROM and points in a convenient direction.

Do not install the main unit on its side or upside down.
This may cause malfunctions.

¡

Install the main unit in horizontal position.

The permissible tilt is within 10° side to 
side and within 30° front to back.

Within 10

°

Within 30

°

Do not install the main unit in locations that tend to get very hot, such as on the dashboard or in the
glove compartment.
This may cause damage to the unit.

To prevent damage, avoid installing the main unit in places where it is exposed to:

¡

Direct sunlight

¡

Air flow from the air conditioner

¡

Heat generated by other equipment

Summary of Contents for CN-DV1800EN













Reviews: