27
Setup Program
(Windows 95 Version: WSET61/62, MS-DOS Version: SETUP61/62, ROM Version: Setup Utility)
Follow the procedure below to specify the operating environment settings (device
port addresses and IRQs, password security, drive protection and reduced power
consumption etc.) for the computer.
Most of the items can be set by either Windows 95, MS-DOS or ROM version.
Press
when the messages "Press F1 for Setup" appear.
(These messages appear only for a few seconds. Setup utility does not
run if you delay pressing
.)
System Setup
Power Management
Supervisor Setup
Save settings
Restore Settings
Load Default Settings(PnP)
Load Default Settings(NonPnP)
Exit Setup
Setup Utility
Select [Exit Setup].
Specify your operating environment settings (device port addresses and
IRQs, password security, drive protection and power consumption etc.)
and select [Save Settings].
Power on.
ROM version
<For CF-61KXF4BAM/E model only>
A:\WINDOWS\COMMAND>
Type the following:
1 Boot
2 Restore HDD to factory default
3 PD tools
MEMO
61
62
SETUP61
62
SETUP62
If the computer cannot be booted from the hard disk, boot it from the "Firstaid FD."
Insert the "Firstaid FD" into the floppy disk drive and power on the computer.
61
SETUP61
62
SETUP62
:\WINDOWS>
Exit Windows 95 and restart the computer in the MS-DOS mode.
Type the following:
MS-DOS version
<For except CF-61KXF4BAM/E model>
Windows 95 version
<For except CF-61KXF4BAM/E model>
Details
"On-Line Manual"-"Utility Pro-
grams"-"Setup Program"
Select [Start]-[Programs]-[Panasonic]-[Setup61 Windows].
61
62
Select [Start]-[Programs]-[Panasonic]-[Setup62 Windows].
Details
On-line Help ( Please press
.)
"On-Line Manual"-"Utility
Programs"-"Setup Utility"
Please print the On-Line manual
(
P.13).
Summary of Contents for CF-61 Series
Page 45: ...45 ...
