background image

Contents

P e r s o n a l   C o m p u t e r

CF-61

 Series

CF-62

 Series

®

O P E R ATING
I N S T R U C T I O N S

Getting Started

Names and Functions of  Parts ....................6

System Unit ....................................................... 6

Status LCD ........................................................ 8

Battery Indicator ............................................... 9

Troubleshooting

Dealing with Problems ................................ 2 8
Reinstalling Windows .................................. 3 1
Handling the PD/CD Drive
(

If the PD/CD Drive  Tray will not  open or close

) ............... 3 4

Diagnostics Program (

DIAG61/62

) .................. 3 6

Error Codes ..................................................... 3 7

A p p e n d i x

LIMITED USE LICENSE AGREEMENT .... 3 8
Specifications................................................. 4 1

For LCD ........................................................... 4 3

I n d e x .................................................................. 4 4

O p e r a t i o n

Basic Operation ............................................. 1 0

S t a r t u p ............................................................ 1 0

S h u t d o w n ........................................................ 1 3

On-Line Manual ............................................ 1 3

PD Cartridge and CD .................................. 1 4

Keyboard ......................................................... 1 6

Touch Pad ....................................................... 1 7

Floppy Disk Drive .......................................... 1 7

Hardware Expansion .................................... 1 8

Multimedia Pocket  (MP) ............................. 1 8

PC Cards ........................................................ 1 9

Memory Expansion ...................................... 2 0

Expansion Bus Connector .......................... 2 1

Hard Disk Drive

(

For technicians at  your nearest Panasonic Service Center

) . 2 2

Infrared Data Transfer .................................. 2 3
Battery Pack .................................................... 2 4

Charging the Battery Pack .......................... 2 5

Replacing the Battery Pack ........................ 2 6

Setup Program  (

Windows 95    Version:  WSET61/62,

MS-DOS    Version: SETUP61/62,  ROM  Version: Setup Utility

) .......2 7

Hardware Technical Data
Utility Programs

Setup Program
(

Windows 95 Version: WSET61/62, MS-DOS  Version: SETUP61/62,

ROM Version: Setup Utility

)

PD/CD Drive Power Control 

(

WPDPOWER/WCDPOWER

)

Formatting a PD Cartridge 

(

AMSILF, AMSIPD

)

Making a Bootable PD Cartridge

  (

MKBOOTPD

)

Compression Sound Recorder
(

Panasonic Sound Recorder

)

Switching the Audio-In Jack 

(WLINEMIC)

Drivers

Display Driver

SCSI Driver

PC Card Driver 

(

CardWorks

)

Infrared Communication Software (

TranXit

)

Backup Software 

(

Seagate Backup

)

On-Line Manual

6 2

......... For only CF-62 series

6 2

6 2

6 2

6 2

Summary of Contents for CF-61 Series



















































Reviews: