background image

4

For reinstallation(

 page  8), create backup disks.  To create backup disks, the op-

tional SuperDisk Drive Pack (CF-VFS371) and 2HD floppy disks are needed.

Eject Button

Label-side up
Insert the shutter-side
headfirst.

Turn the computer off, then remove the CD-ROM drive (

 "Multimedia

Pocket").

1

Set the SuperDisk Drive Pack in the multimedia pocket and turn the computer on.

2

3

Set a floppy disk and make sure it is not in the write-protected state, then select
[Start] - [Programs] - [Panasonic] - [Create Tool Disk] and follow the on-screen
instructions.  Place a label identifying the contents on each disk.

Create backup disks

Please store the floppy disks in a safe place. They will enable you to return
your computer to factory default settings should any problems occur.

While the MP indicator (

) is on, do not remove the floppy disk, power

down your computer or use the suspend or hibernation function (

 

"Suspend/Hibernation Functions").
When creating floppy disks, do not run any other application program.
When creating floppy disks and the message [Insufficient files to copy] is
displayed, press [OK] then contact Panasonic Technical Support.
The Tool Disk cannot be accessed through [My Computer] or by typing the
"DIR" command at the Command Prompt, because it uses a special file for-
mat.

CAUTION

Names of created backup disks

Tool Disk, Backup Disk*

*

 There are instances where it is not necessary to create backup disks.

First-time Operation

8

Partition the Hard Disk

The hard disk includes an NT file system (NTFS) partition of 4GB.  The remaining free hard
disk space can be used when necessary by creating more partitions (in [Start] - [Programs] -
[Administrative Tools (Common)] - [Disk Administrator]).

7

Install Acrobat

®

 Reader 4.0

2

3

1

In [Start] - [Run], input [c:\util\reader\Ar40eng.exe], then press [OK].

After reading the "Software License Agreement", select [Accept] if you agree to
the terms.

Press [Next].

4

5

Press [Next] and set up the Acrobat

®

 Reader 4.0.

At the [Setup Complete], Select [Yes, I want to restart my computer now], then select [Fin-
ish].

Acrobat

®

 Reader is necessary to view the Reference Manual, which explains

detailed operational procedures concerning your computer.

NOTE

Summary of Contents for CF-37 Series













Reviews: