6
7
Accessories and Options
Accessories
Power cable x 1 (BT-4LH310P)
Power cable x 2 (BT-4LH310E)
Stand (already attached to the unit) x 1
Stand mounting screws (already attached to the unit) x 4
Protective panel mounting screws (M3, 8 mm (5/16″) long) x 4
• Use these screws for the permanent attachment of a protective panel designed for the unit. (→page 11)
•
Tightening torque: Tighten to about 30 N·cm or less
CD-ROM x 1
<Note>
•
After unpacking the product, dispose of the AC cord cap(BT-4LH310E) and packaging material in an appropriate manner.
•
Store the small parts in an appropriate location that is out of the reach of infants and small children.
About These Operating Instructions
•
These operating instructions refer to BT-4LH310P/BT-4LH310E as “this unit.”
•
The illustrations, explanatory drawings, and other figures included in these operating instructions are for illustrative purposes only
and may differ from the actual appearance.
•
HDMI, HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and/or other countries.
•
VESA and DisplayPort are trademarks or registered trademarks of the Video Electronics Standards Association.
•
Adobe
®
Reader
®
is a trademark of Adobe Systems Incorporated.
• Page references are indicated as (→ page 00) in these operating instructions.
Transportation precautions
Do not try to lift the monitor by grabbing the LCD panel.
Transport the monitor standing upright and secure it so that it cannot
fall over to prevent damaging it.
Do not expose the LCD panel to strong pressure or pressure from pointed objects. Take care especially during transportation.
Exposing the LCD panel to strong pressure may result in blurring or other damage.
