14
15
Detaching and Attaching the Stand
The stand is detachable.
•
When detaching and attaching the stand, it is recommended that you place the unit flat on the edge of a desk or table with a soft
cloth or similar material spread underneath.
•
The stand is specifically designed for this monitor and cannot be used with other monitors.
Detaching the Stand
Stand mounting screws
Remove the stand mounting screws (four) using a Phillips
screwdriver.
•
Store the detached stand and stand mounting screws in a safe
place for future use.
Attaching the Stand
④
①
②
③
1.
Align the holes in the stand with those in the monitor.
2.
Use a Phillips screwdriver to secure the stand to the unit
with the stand mounting screws (four).
•
Install the mounting screws in the order (
A
to
D
) shown in
the figure.
•
When attaching the stand, tighten the stand mounting
screws to a tightening torque from 80 N·cm to 120 N·cm.
