Panasonic BT-4LH310P, Operating Instructions Manual

Page: 61 / 76

60 61
REMOTE Specifications
(Continued)
No. Command parameter Description Response data
33 QCS COLOR SPACE 0: SMPTE-C 1: EBU 2: ITU-709 3: DCI-P3
7: NATIVE
34 QPC:SHP
SHARPNESS MODE 0: LOW 1: HIGH 2: MIDDLE
35 QPC:SHH SHARPNESS H 00 to 60: Horizontal sharpness setting value
36 QPC:SHV SHARPNESS V 00 to 60: Vertical sharpness setting value
37 QMO MONO 1: OFF 2: ON
38 QZM ZOOM MODE 0: OFF 1: ON
39 QZP ZOOM MODE POSITION 0: CENTER 1: LT 2: RT 3: LB 4: RB
40 QFG FRAME GRAB 0: OFF 1: ON
41 QFI
FOCUS IN RED 0: OFF 1: ON
42 QFM FOCUS IN RED MODE 0: NORMAL 1: PRECISE
43 QFC FOCUS IN RED COLOR 0: RED 1: BLUE 2: MONO
44 QYM Y MAP 0: OFF 1: ON
45 QZB ZEBRA 0: OFF 1: INT. 2: EXT. 3: INT.+EXT.
46 QZI ZEBRA LEVEL INT. XXXYYY: INT. range (-07 to 000 to 109)
XXX: MIN value YYY: MAX value
47 QZE ZEBRA LEVEL EXT. XXXYYY: EXT. range (-07 to 000 to 109)
XXX: MIN value YYY: MAX value
48 QWS WFM 1: WFM Y 2: WFM R 3: WFM G 4: WFM B
49 QWM WFM MODE 0000: ALL XXXX: LINE XXXX: Display line value
50 QVM VECTOR MODE 0: x1 1: x2S 2: x2 3: x4 4: x8
51 QVS VECTOR SCALE 0: 100% 1: 75%
52 QTP TIMECODE POSITION 1: RIGHT 3: LEFT
53 QGS GROUP SELECT 0: 1 to 8 1: 9 to 16
54 QSL SELECT L 0: 1ch/9ch 1: 2ch/10ch 2: 3ch/11ch 3: 4ch/12ch
4: 5ch/13ch 5: 6ch/14ch 6: 7ch/15ch 7: 8ch/16ch
55 QSR SELECT R 0: 1ch/9ch 1: 2ch/10ch 2: 3ch/11ch 3: 4ch/12ch
4: 5ch/13ch 5: 6ch/14ch 6: 7ch/15ch 7: 8ch/16ch
56 QSS 4K AUDIO INPUT
SELECT SDI
0: SDI1 1: SDI2 2: SDI3 3: SDI4
57 QDS 4K AUDIO INPUT
SELECT DisplayPort
0: DisplayPort1 1: DisplayPort2
58 QHS
4K AUDIO INPUT
SELECT HDMI
0: HDMI1 1: HDMI2
59 QBO BLUE ONLY 0: OFF 1: ON
60 QBM BLACK MODE 0: OFF 1: ON
61 QRC R COLOR 0: OFF 1: ON
62 QGC G COLOR 0: OFF 1: ON
63 QBC B COLOR 0: OFF 1: ON
64 QDP SDI DISPLAY MODE 0: SINGLE 1: QUAD
65 QPP PIXEL TO PIXEL 0: OFF 1: ON
66 QDT DISPLAY SELECT [For QUAD]
0: SDI1 1: SDI2 2: SDI3 3: SDI4
[For PICTURE ASSIST]
1: AREA2 2: AREA3 3: AREA4
67 QMF
MULTI FUNCTION 0: OFF 1: ON
68 QPA PICTURE ASSIST 0: OFF 1: ON
69 QMT AUDIO MUTE 0: OFF 1: ON
70 QLM LEVEL METER 0: OFF 1: 2ch 2: 4ch 3: 8ch
(Continued on next page)