1. Remove five Screws (B).
2. Remove the solder of Antena Cable (two point A
and C).
3. Remove Main Board.
4. Remove Antenna.
8. TROUBLE SHOUTING GUIDE
- Press the Factory default reset button to reset to the original defaults.
- Connect the PC to each LAN1~4 port with the LAN cable.
- Insert the wireless network card (802.11b/g) into the PC.
(Confirm that the BL-WV10A unit and the wireless network card are
placed in such a way that radio waves can travel between them)
- Set up your PC.
8.1. PC SETUP
System requirements
- A notebook PC with a CardBus slot and Windows XP installed as the
operating system
18
Summary of Contents for BL-WV10A
