Panasonic BL-WV10A, Service Manual

Page: 12 / 55

Indicator Color Description
Timer/Busy Green Timer/Sensor recording has been
set.
Turn off by pressing [TIMER] on
the remote control.
Green
(flashing) Timer/Sensor recording cannot be
turned on due to insufficient free
space on the SD memory card. The
indicator will flash for about 6
seconds.
Also flashes when the timer
recording setting is invalid (no SD
memory card installed, etc.)
Off Timer/Sensor recording is not set.
Turn on by pressing [TIMER] on
the remote control.
Amber
(flashing) Data is either being written to or
read from the SD memory card.
Power Green The unit is turned on.
Red
(flashing) A problem was detected during the
power-on diagnostics.
Amber
(flashing) Power-on diagnostics are in
progress.
ALERT Green The buzzer is turned on. Turn off
by pressing [ALERT] on the remote
control.
Off The buzzer is turned off. Turn on
by pressing [ALERT] on the remote
control.
Sensor Amber The sensor is on.
Orange
(flashing) The indicator will flash every 0.5
seconds when a camera is being
detected by the sensor. After
detection, the indicator will flash
every second. To turn off the
indicator.
Off The sensor is off.
LAN 1--4 Green The unit is connected to wired
cameras or to a router.
Wireless Green The unit is connected to wireless
cameras.
5.2. REMOTE CONTROL
12