Preset
This selects the preset position to be operated from the pull-down menu.
[Set]
This is used to register the current status in the preset
position now selected on the pull-down menu.
It does not function if [Home] has been selected on the
pull-down menu.
[Move]
The camera direction moves to the preset position which is
now selected on the pull-down menu.
The settings that are reproduced at this position are the
settings which were established on the [Preset Scope]
menu (→ page 48, page 79, page 80).
The camera direction moves to the home position if [Home]
has been selected on the pull-down menu.
In such cases, the image output during movement to the
home position will not freeze, regardless of the [Freeze
During Preset] setting.
[Delete]
This is used to delete the preset position setting which is
currently being selected.
It does not function if [Home] has been selected on the
pull-down menu.
Zoom
[–]
Use this to adjust the zoom (magnification) in the Wide
direction.
[×1.0]
Use this to adjust the zoom (magnification) to 1.0x.
[+]
Use this to adjust the zoom (magnification) in the Tele
direction.
[D-Zoom]
Use this to enable or disable the digital zoom.
[D-Ext.]
Enable or disable the digital extender.
This operates only when digital zoom is disabled.
Focus
[Near]
Use this to adjust the focus in the Near direction.
It does not work during automatic adjustments.
[O.T. AF]
When this is pressed while the focus is being adjusted
manually, the focus will be temporarily adjusted
automatically. It does not work during automatic
adjustments.
[Far]
Use this to adjust the focus in the Far direction.
It does not work during automatic adjustments.
[Auto]
Use this to switch between auto and manual focusing.
Brightness
[–]
Use this to make the image darker.
It does not work during automatic adjustments.
[+]
Use this to make the image lighter.
It does not work during automatic adjustments.
[Auto]
Use this to switch the picture brightness adjustment
between auto and manual.
Control pad and its buttons
To adjust the image in the horizontal or vertical
direction (panning or tilting), left-click the pad and the
buttons.
The more the outside of the pad is clicked, the faster
the camera operates.
Adjustment is also possible by dragging the mouse.
Right-click the pad to initiate zooming and focusing.
When the top half of the pad is clicked in the up or
down direction, the zoom (magnification) is adjusted
in the Tele direction; conversely, when the bottom half
of the pad is clicked, the zoom is adjusted in the Wide
direction.
When the left half of the pad is clicked in the left or right
direction, the focus is adjusted in the Near direction;
conversely when the right half of the pad is clicked, the
focus is adjusted in the Far direction. The zooming can
also be adjusted by operating the mouse wheel.
<NOTE>
• When the mouse is used for dragging and dropping from the control
pad area to a position outside this area, the panning, tilting and
other operations will not stop.
In a case like this, click the control pad area to stop these
operations.
Speed
Use this to select the speed at which the pan, tilt, zoom,
focus, and brightness operations are to be performed.
Speed With Zoom POS.
“Off” or “On” is set here for the function used to adjust the pan-tilt
adjustment speed in conjunction with the zoom magnification.
Setting value:
Off
The panning and tilting operations will not become slower in the
zoom status.
On
The panning and tilting operations will become slower in the
zoom status.
This function has no effect during preset operations.
Focus ADJ With PTZ.
“Off” or “On” is set here for the function which compensates for out-of-
focusing when it occurs during panning, tilting or zooming operations.
Setting value:
Off
Out-of-focusing is not compensated.
On
Out-of-focusing is compensated.
When [Off] is set, adjust the focus as required after zooming or set
the focus to the auto mode.
This item can be selected only when [Manual] has been selected as
the [Focus Mode] setting.
Preset Setting
Preset Speed Table
Set the preset speed table (Slow, Fast).
During preset playback, presets are performed at [Preset Speed] (1 to
30) values that are based on the table set here.
Setting value:
Slow
Set the preset speed table to slow.
Fast
Set the preset speed table to fast.
Preset Speed
Set the pan/tilt movement speed used when recalling camera
orientation information registered to the preset memory (30 steps).
Setting range:
1 to 30
<NOTE>
• When you set large [Preset Speed] values, the image may sway
when the movement stops.
78
Web screen configurations (continued)
