z
z
Intelligent screen [Intelligent]
This item’s setting is reflected when the [Set] button is pressed.
Intelligent
Set the operating mode for the intelligent function.
This function automatically corrects the picture level and color
temperature according to outdoor changes.
Setting value:
Off
Operates using the settings from the menu or camera
controller.
On
Performs auto exposure and auto tracking white balance.
Lock
Maintains the adjustment states of auto exposure and auto
tracking white balance at the point in time when the setting
is changed from [On] to [Lock].
Factory settings:
Off
<NOTE>
• While the intelligent function is operating, you cannot switch to night
mode.
Intelligent Mode
Set the control items for the intelligent function.
Setting value:
AE
Controls auto exposure by controlling the gain (including
[Frame Mix]), controlling the shutter, and changing the ND
filter when adjustment is not possible with the iris.
AE+ATW
Automatically controls the ATW in addition to the control of
[AE].
Factory settings:
AE+ATW
ND Filter Select
Select the ND filter for during auto exposure operation.
Control from the camera controller is not possible while auto exposure
is operating.
Setting value:
Through
Do not use an ND filter.
1/8
Use the ND filter with a transmittance of 1/8.
1/64
Use the ND filter with a transmittance of 1/64.
Auto
Change the ND filter automatically.
Factory settings:
Auto
AGC Mode
Set the control mode for the AGC operation.
Setting value:
Normal
AGC increases the gain up to a maximum of 18 dB.
Sports
AGC increases the gain up to a maximum of 30 dB.
(Without [Frame Mix])
SN
AGC increases the gain up to a maximum of 42 dB. (With
[Frame Mix])
Factory settings:
Normal
<NOTE>
• Even if [SN] is set, the operation will be the same as with [Sports]
when the video format is set to any of the following formats.
1080/29.97p, 1080/23.98p, 1080/29.97PsF, 1080/23.98PsF,
1080/25p, 1080/25PsF
z
z
Matrix settings screen [Matrix Settings]
Set matrix settings.
To display the Matrix Settings screen, click the [Setup] button for [Matrix
Type] at the bottom of the Image/Position screen.
These settings can only be configured when [Matrix Type] is set to
[User].
The settings in this screen are applied immediately.
76
Web screen configurations (continued)
