z
Basic operations for the menus
For detailed operations, refer to the Operating Instructions of the AW-RP50 — <Operations and Settings>.
POWER
ALARM
F1
CAMERA
OSD
R/B GAIN
R/B PED
SYSTEM
SETUP
CAMERA
SCENE/MODE
DETAIL
DELETE
STORE
PAGE
MENU
F2
EXIT
USER2
USER1
PT ACTIVE
AUTO
IRIS
AUTO
HI
LOW
PTZ/FOCUS SPEED PAN/TILT
FOCUS/
PUSH
OTAF
TELE
ZOOM
WIDE
CAMERA STATUS / SELECTION
PRESET MEMORY / MENU
GAIN/PED
F2
F1
1
2
3
AWB/ABB
4
SHUTTER
5
1
2
3
4
5
6
7
8
9
10
2
3
1
1.
Set the MENU button to ON.
Press the MENU button and light its indicator.
2.
Select the target menu.
Press the corresponding PRESET MEMORY/MENU button, and
light its indicator.
The selected menu is displayed on the LCD panel.
3.
Change the settings using the F1 dial and F2 dial.
Use the F1 dial and F2 dial to select the menus and change the
settings.
Use the F1 dial for operations involving the items displayed on the
top line of the LCD panel.
Use the F2 dial for operations involving the items displayed on the
bottom line of the LCD panel.
p
p
Press the EXIT button to return the menu to its previous
hierarchical level.
p
p
When the down arrow “
” is displayed for a setting item, it means
that the value shown will be entered and the setting reflected when
the F1 dial or F2 dial is pressed.
1.GROUP SELECT
1
p
p
When the down arrow “
” is not displayed for a setting item,
it means that the value shown will be entered and the setting
reflected when the F1 dial or F2 dial is turned.
R GAIN : ±0
B GAIN : ±0
F1 dial
F2 dial
20
AW-RP50 (not supplied) (continued)
