manualshive.com logo in svg

Panasonic AW-HR140, Operating Instruction

Share
Download
Panasonic AW-HR140 Operating Instruction Download Page 73

Super Gain

Set the super gain (increased sensitivity) mode.

Setting value:

Off

Do not set super gain mode.

On

Set super gain mode.

Factory settings:

 Off

AGC Max Gain

When [Auto] is selected as the [Gain] setting, the maximum gain-up 

amount can be set.

Setting value:

 6dB / 12dB / 18dB

Factory settings:

 18dB

Frame Mix

Select for frame addition (gain-up using sensor storage) amount.

When frame addition is performed, it will appear as if the images are 

missing some frames.

Setting value:

 Off / 6dB / 12dB / 18dB / 24dB

Factory settings:

 Off

• 

This cannot be configured when the format is 1080/29.97p, 

1080/23.98p, 1080/29.97PsF, 1080/23.98PsF, 1080/25p, or 

1080/25PsF.

• [Frame Mix] cannot be set to [18dB] or [24dB] when [Iris Mode], 

[Gain], or [Focus Mode] is set to [Auto]. (When setting [Frame Mix] 

to [18dB] or [24dB], set [Iris Mode] and [Focus Mode] to [Manual] 

and set [Gain] to any setting other than [Auto].)

<NOTE>

• Under discharge tube illumination, such as fluorescent and mercury-

vapor lights, the brightness may change synchronously, colors may 

change, and horizontal stripes may flow up and down the image.

In such cases, we recommend setting the electronic shutter speed 

to 1/100 in regions with 50 Hz power supply frequency, and to OFF 

in regions with 60 Hz power supply frequency.

ND Filter

Set the transmittance of the lens’ built-in ND (neutral density) filter.

Setting value:

Through

Do not set ND filter.

1/8

Set ND filter transmittance to 1/8.

1/64

Set ND filter transmittance to 1/64.

Factory settings:

 Through

Day/Night

Switch between standard shooting and night-vision shooting (shooting 

with infrared light).

Setting value:

Day

Standard shooting (day mode)

Night

Night-vision shooting (night mode)

Factory settings:

 Day

<NOTE>

• The iris will be forcibly opened.

• White balance adjustment is not possible in night mode.

• ND filter switching is not possible in night mode.

• Pedestal adjustment is not possible in night mode.

• In night mode, the intelligent function does not operate.

Picture

72

73

Web screen configurations  (continued)

Summary of Contents for AW-HR140





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands