Operations on the AK-HRP200 Remote Operation Panel
GAIN
AUTO
BLACK
SET UP
WHITE
BARS
TEST
VF
POWER
HEAD
POWER
DTL
OFF
SHUTTER
ON
STEP/SYNC
KNEE
OFF
SKINDTL
MATRIX
5600K
SCENE 4
STORE
SCENE 3
SCENE 2
SCENE/USER FILE
SCENE 1
USER 3
USER 2
USER 1
SHIFT
FLARE/PED
CAMERA
No.
DTL
DATA
SET
DISPLAY SELECT
UP
DOWN
SET UP
ND/CC M.GAIN/M.PED SHUTTER
ND
VR LOCK
M.GAIN
IRIS
M.PED
10-19
CC
SHT
SYNC
SELECT
IRIS/M.PED LOCK
IRIS
M.PED
CHARA
MENU
SELECT
TALLY/CALL
ALM
OPT
SENSE
PUSH
PREVIEW
EXT
D.EXT
COARSE
AUTO
FULL
OPEN
CLOSE
CLOSE
EXECUTE
EXIT
SAVE/LOAD
SHIFT
+
UP+DOWN
Selects a camera to be operated.
1. Press <SELECT> for about 2
seconds.
The camera number in the camera
number display area blinks.
2. Press the lit <DATA SET> buttons
(<UP> and <DOWN>).
Press the lit <DATA SET> buttons
(<UP> and <DOWN>) to select the
camera number.
3. Press the <SELECT> (camera
selection) button.
Control of the selected camera is
enabled.
For operating the camera menus.
When the <CHARA/MENU> button is
pressed for 2 seconds, the selected
camera menu is displayed, overlapping
the camera output image. When it is
pressed for 2 seconds while a camera
menu is displayed, the menu is exited.
SELECT:
Turn to move the cursor up and
down in the camera menu or to
change setting values. Press to
move to the next level of a menu
item or to change a setting value at
the lowest level.
z
Camera menu operation
1.
Press and hold the <CHARA/MENU> button on the
AK-HRP200 for about 2 seconds.
The AW-HR140 camera menu appears on the monitor.
2.
Turn the <SELECT> dial to select an AW-HR140 camera
menu item or to change a setting value.
Turn the <SELECT> dial to move the cursor up and down or to
change setting values.
Press the <SELECT> dial to move to the next level of a menu item or
to change a blinking setting value at the lowest level.
3.
To exit the camera menu, press and hold the <CHARA/
MENU> button for about 2 seconds.
34
35
Basic setup operations (continued)
