background image

Read this first! (For AW-HR140EJ)

WARNING:

• To reduce the risk of fire or electric shock, do not expose this 

equipment to rain or moisture.

• To reduce the risk of fire or electric shock, keep this equipment 

away from all liquids. Use and store only in locations which are 

not exposed to the risk of dripping or splashing liquids, and do 

not place any liquid containers on top of the equipment.

WARNING:

Always keep the mounting bolt, washer, spring washer and 

drop-prevention wire mounting screw out of the reach of infants 

and small children.

WARNING:

This equipment is compliant with Class A of CISPR 32.

In a residential environment this equipment may cause radio 

interference.

CAUTION:

Do not remove panel covers by unscrewing.

To reduce the risk of electric shock, do not remove the covers. 

No user serviceable parts inside.

Refer servicing to qualified service personnel.

CAUTION:

In order to maintain adequate ventilation, do not install or place 

this unit in a bookcase, built-in cabinet or any other confined 

space. To prevent risk of electric shock or fire hazard due to 

overheating, ensure that curtains and any other materials do not 

obstruct the ventilation.

CAUTION:

To reduce the risk of fire or electric shock and annoying 

interference, use the recommended accessories only.

CAUTION:

Check the installation at least once a year.

An improper installation could cause the unit to fall off resulting 

in personal injury.

 indicates safety information.

AEEE Yönetmeliğine Uygundur.

AEEE Complies with Directive of Turkey.

2

3

Summary of Contents for AW-HR140





























































































































Reviews: