background image

IP Network screen

     IP Network 

 IP Address

           192.168.  0. 10

 Subnet Mask

           255.255.255.  0

 Default Gateway

           192.168.  0.  1

 Return

IP Address

This is selected to display the IP address which has been set for the 

unit.

Subnet Mask

This is selected to display the subnet mask which has been set for 

the unit.

Default Gateway

This is selected to display the default gateway which has been set for 

the unit.

<NOTE>

• On this screen, the [IP Address], [Subnet Mask] and [Default Gateway] 

settings can be displayed but they cannot be changed.  

To change an address, use “Network setup screen [Network]” 

(→ page 86) on the Web setting screen [Setup] or “Use the Easy IP 

Setup Software to establish the unit’s settings” (→ page 20).

Return

Return to the previous menu level.

„

„

Concerning initialization

When [Initialize] is selected on the [Maintenance] screen, the [Initialize] 

screen appears.

Initialize screen

     Initialize 

 Do you want to initialize

 Menu settings?

 CANCEL

 O.K.

• When the cursor is moved to [O.K.] on the [Initialize] screen and the 

setting is entered, the [Menu settings initialized] screen is displayed for 

5 seconds, and the camera settings are restored to the settings which 

were established when the camera was purchased.  

However, the [Format] settings and [Frequency] settings 

(→ page 51) and network settings are not initialized.

<NOTE>

• Operation returns to the [Top Menu] screen when the initialization 

operation is completed. At this point, set the unit to the Standby mode, 

and then set it to the Power ON mode again. (→ page 22)

• The [Format] and [Frequency] settings are not initialized.

• The [AWB] and [ABB] adjustment values are not initialized.

Menu settings initialized screen

 Menu settings

 initialized

• When the cursor is moved to [CANCEL] on the Initialize screen 

and the setting is entered, the [Menu settings unchanged] screen is 

displayed for 5 seconds, the initialization operation is not performed, 

and the [Maintenance] screen returns to the display.

Menu settings unchanged screen

 Menu settings

 unchanged

56

Camera menu items  (continued)

Summary of Contents for AW-HN130KP





























































































































Reviews: