Panasonic AW-HN130KP Operating Instructions Manual Download Page 35

Page: 35 / 124

When performing the operations using the

wireless remote control

Press the <CAM1>, <CAM2>, <CAM3> or <CAM4> button

to select the unit which is to be operated.

Press and hold the <MENU> button for about 2 seconds.

The Top Menu is displayed.

Press the <

> or <

> button to bring the cursor to the

item to be selected.

Each time the <

> or <

> button is pressed, the cursor moves.

The cursor can be moved in the same way using the <

> or <

buttons.

Press the <

> button.

The sub-menu of the selected item is displayed.

(Some sub-menu items have a sub-menu of their own.)

Press the <

> or <

> button to bring the cursor to the

item to be set.

Each time the <

> or <

> button is pressed, the cursor moves.

The cursor can be moved in the same way using the <

> or <

button.

With the cursor at the “Return” position, press the <

> button to

return to the previous menu.

Press the <

> button.

The value of the item to be set starts blinking.

Press the <

> or <

> button to change the setting.

The setting can be changed in the same way using the <

> or <

button.

Press the <

> button.

The value of the item to be set is entered, and it stops blinking.

After the setting has been completed, press the <MENU>

button for 2 seconds.

The camera menu display is exited.

Basic setup operations (continued)

Summary of Contents for AW-HN130KP





























































































































Search results

Summary of Contents for AW-HN130KP

Reviews:

Related manuals for AW-HN130KP

Brands by name

Popular brands

Panasonic AW-HN130KP, Operating Instructions Manual

Search results

Summary of Contents for AW-HN130KP

Reviews:

Related manuals for AW-HN130KP

Brands by name

Popular brands