Panasonic AW-HE20KE, Operating Instruction

Page: 32 / 126

32
3
Click the MAC address/IPv4 address of the camera to be set, and click the [Network settings] button.

When a DHCP server is being used, the IP address allocated to the unit can be checked by clicking the [Search]
button of the Easy IP Setup Software.

If the same IP address is used for any additional cameras, the numbers of the additional cameras will be
displayed in the “IPv4 overlap” column of the cameras concerned.

When the [Web GUI] button is clicked, the Live screen of the selected camera is displayed.

The screen display of EasyIP Setup Tool Plus may vary by its version.
4
Input the network items, and click the [Setup] button.

When a DHCP server is being used, [DNS] of the Easy IP Setup Software can be set to [Auto].

After the [Save] button is clicked, it takes about 1 minute for the settings in the unit to be completed.

If the AC adaptor or LAN cable is disconnected before the settings are completed, the settings will be canceled. In
this case, repeat the steps to establish the settings.

When a firewall (including software) has been introduced, enable access to all the UDP ports.