Panasonic AW-HE20KE Operating Instruction Download

Page: 81 / 126

Audio

Click [Setup] > [Image/Audio] > [Audio]

Click [Set] to enable the configuration.



Audio

    [Off, On]
  Select On or Off to enable or disable audio.
  [Note]

1. If you switch audio

Off

during IP streaming, audio skipping might occur.

2. When Audio is On, RTMP transmission may not start. (Such an occasion arises when the server to which RTMP

transmission is delivered requires audio transmission)

3. If you change Audio from

Off

during RTMP transmission, RTMP transmission may stop.

Input Type

[Mic, Line]

Mic Set the microphone input.

Line Set the line input.

Volume Level

[–36 dB to +12 dB]
Set the volume level of audio output.
This is only enabled when [Audio] is set to [On].

Plugin Power

[Off, On]

Turn the plugin power for the audio off/on.
This is only enabled when [Audio] is set to [On].

Summary of Contents for AW-HE20KE































































































































Search results

Summary of Contents for AW-HE20KE

Reviews:

Related manuals for AW-HE20KE

Brands by name

Popular brands

Panasonic AW-HE20KE, Operating Instruction

Search results

Summary of Contents for AW-HE20KE

Reviews:

Related manuals for AW-HE20KE

Brands by name

Popular brands