Panasonic AW-HE20KE, Operating Instruction

Page: 44 / 126

44
Adjust the White Balance
In order for the white to be reproduced accurately, the ratio between the three primary colors (RGB) is adjusted. If the
white balance has shifted out of adjustment, not only will the white be reproduced poorly but the color tones of the
entire screen will also be degraded.

This adjustment must be performed when using the unit for the first time or when the unit has not been used for
a prolonged period.

It must be performed when the lighting conditions or brightness has changed.

Once the white balance values have been adjusted, their setup procedure will be completed simply by selecting
them using the menus, web settings or by pressing the buttons on the controller; provided that they are going to
be used under the same conditions as the ones established when the values were set. There is no need to set it
again.

Once a new setting is entered, the previous setting will be erased.
[Note] For details, refer to “ Selecting the Scene Mode ” section.
Automatic Adjustment (AWB: AWB A or AWB B)
When performing the operations using the wireless remote control
1. Shoot a white subject (such as a white wall or handkerchief) so that it fills the screen.
Do not shoot shiny or very bright objects.
Steps 2 through 6 represent the procedure for selecting the “AWB A” or “AWB B” memory. They need not be taken if a
selection has already been made.
2. Select a scene mode by following the procedure in “Selecting the Scene Mode” section.
3. P ress the [▲] or [▼] button to bring the highlight to “ White Balance Mode ”. Press the [ ] button to enter White
Balance mode menu.