Panasonic AW-HE20KE, Operating Instruction

Page: 30 / 126

30
3. Click the MAC address/IPv4 address of the camera to be set, and click the [Network Settings] button.
[Note]

When a DHCP server is being used, the IP address allocated to the unit can be checked by clicking the [Search]
button of the Easy IP Setup Software.

If the same IP address is used for any additional cameras, the numbers of the additional cameras will be displayed
in the [IPv4 overlap] column of the cameras concerned.

When the [Access Camera] button is clicked, the live screen of the selected camera is displayed.
4. Input the network items, and click the [Save] button.
[Note]

When a DHCP server is being used, [DNS] of the Easy IP Setup Software can be set to [Auto].

After the [Save] button is clicked, it takes about 1 minute for the settings in the unit to be completed. If the AC
adaptor or LAN cable is disconnected before the settings are completed, the settings will be canceled. In this case,
repeat the steps to establish the settings.

When a firewall (including software) has been introduced, enable access to all the UDP ports.