Panasonic AVCCAM AG-AC160EJ Page 90 Operating Instructions Manual Download

Page: 90 / 110

Item

Display

mode

Description of settings

[INTERVAL

REC]

<CAMERA>

(AVCHD

mode only)

Scenes changing slowly over a long period are recorded as short movies by

providing a recording interval. One frame is recorded in each recording time

period that has been set, and in the AVCHD mode 24 frames (PAL 25 frames)

form a one-second video.

[OFF], [1SECOND], [10SECONDS], [30SECONDS], [1MINUTE], [2MINUTES]

When INTERVAL REC is enabled, set the recording format as follows. If the

recording format is not set to the following, the [INTERVAL REC] item of the

[RECORDING SETUP] screen is grayed out and cannot be enabled.
When [SYSTEM FREQ] = [59.94Hz]:

[PH 1080/24P]

When [SYSTEM FREQ] = [50Hz]:

[PH 1080/25P]

•

When set to [PH 1080/24P], TC RECRUN is fixed to NDF.

•

The maximum shooting time is 168 hours.

•

Audio recording is disabled.

[TIME STAMP] <CAMERA>

Enables a function to superimpose [DATE]/[TIME] information over the shot

images.

[ON]:

The information set in the [DATE]/[TIME] item is superimposed.

[OFF]:

Date and time information are not superimposed on the image.

[PH AUDIO

MODE]

<CAMERA>

(AVCHD

mode only)

Selects the format of audio recording when [REC FORMAT] = PH.

[LINEAR PCM]:

Recording is performed in uncompressed LPCM.

[Dolby Digital]:

Recording is performed in Dolby Digital.

•

The camera is fixed to Dolby Digital other than PH mode.

•

Content recorded with [LINEAR PCM] cannot be played back on our previous

model.

[AUDIO

LIMITER CH1]

<CAMERA>

Enables the limiter function on CH1 audio input.

[ON]:

Level is reduced only when input exceeds limit (adjustable using

<AUDIO LEVEL> knob).

[OFF]:

No limiter (adjustable using <AUDIO LEVEL> knob)

[AUDIO

LIMITER CH2]

<CAMERA>

Enables the limiter function on CH2 audio input.

[ON]:

Level is reduced only when input exceeds limit (adjustable using

<AUDIO LEVEL> knob).

[OFF]:

No limiter (adjustable using <AUDIO LEVEL> knob)

[MIC GAIN1]

<CAMERA>

Sets the input level of the external microphone connected to the AUDIO INPUT1

terminal.

[-40dB], [-50dB], [-60dB]

[MIC GAIN2]

<CAMERA>

Sets the input level of the external microphone connected to the AUDIO INPUT2

terminal.

[-40dB], [-50dB], [-60dB]

is the factory default mode.

Summary of Contents for AVCCAM AG-AC160EJ















































































































Search results

Summary of Contents for AVCCAM AG-AC160EJ

Reviews:

Related manuals for AVCCAM AG-AC160EJ

Brands by name

Popular brands

Panasonic AVCCAM AG-AC160EJ, Operating Instructions Manual

Search results

Summary of Contents for AVCCAM AG-AC160EJ

Reviews:

Related manuals for AVCCAM AG-AC160EJ

Brands by name

Popular brands