background image

1

Dear customer, 

Congratulations on purchasing a high quality MAGINON® product.

You have acquired a modern digital action camcorder with excellent technical features and

respective accessories, which is particularly easy to operate.

Please study this information in detail observing, in particular, the safety instructions.

The device comes with a 3 year warranty. You will need the enclosed warranty card and

your sales receipt in the event of the camera developing a fault.

Keep these in a safe place together with the Instruction Manual.

Please include the Instruction Manual when passing on the camera to a third party.

1. Contents of box

Carefully unpack camcorder and check that all of the following components are 

contained in the box: 

 Note:

•  Remove the protective foil from the camcorder lens by pulling the protruding tabs.
•   Caution! Keep plastic foil and bags away from babies and small children, as otherwise danger of 

suff ocation.

  1.  MAGINON® Action Sports HD 1

  2.  8 GB microSDHC memory card    

   

with SD card adapter

  3.  Lithium-Polymer battery

  4.  USB power adapter

  5.   Cycle  fi xing

  6.  2 helmet fi xings

  7.  Universal fi xing

  8.  10 self-adhesive pads

  9.  Arm attachment

  10.  80 cm Velcro strap with fi xing

  11. Pouch

  12.  Additional water-tight cap

  13.  2 fi xing extensions

  14.  2 fi xing extensions 90°

  15.  6 fi xing bolts

  16.   Sealing cap with 

microphone opening

  17.  6 sealing rings

  18.  Oil for sealing rings

  19.  USB cable

  20.  Software CD

  21.  Instruction Manual

  22.  Warranty documents

Summary of Contents for Action Sports HD 1































Reviews: