Panasonic AVCCAM AG-AC160EJ Page 38 Operating Instructions Manual Download

Page: 38 / 110

Setting the synchro scan

Press the <DIAL SEL> button and select

[DIAL SHUTTER].

Turn the <SHTR/F.RATE> dial and set the

synchro scan.

Press the <DIAL SEL> button and select

[DIAL SYNCHRO SCAN].

Turn the <SHTR/F.RATE> dial.

•

The [SYNCHRO SCAN] shutter speed can be
set.

•

The shutter speed changes quickly when
turning the <SHTR/F.RATE> dial while holding
it down.

•

Synchro scan can also be set with the
[SYNCHRO SCAN] item on the setup menu
[SCENE FILE] screen.

• The setting format can be changed with the

[SYNC SCAN TYPE] item on the setup menu
[SCENE FILE] screen.
[deg.]: angle display (180.0d etc.)
[sec]: speed display (1/48.0 etc.)

Setting the frame rate

Press the <DIAL SEL> button and select

[DIAL FRAME RATE].

Press the <SHTR/F.RATE> dial.

Each time the <SHTR/F.RATE> dial is pressed,
VFR OFF and the frame rate setting mode
switch.

•

The frame rate can be set by turning the
<SHTR/F.RATE> dial.

•

The frame rate can also be set from the
[FRAME RATE] item in the setup menu
[SCENE FILE] screen.

• Before using the frame rate function, it is

necessary to set the [REC FORMAT] item on
the setup menu [RECORDING SETUP] screen
to [PH 1080/24P] or [PH 1080/30P] (or [PH
1080/25P]).

• When you set the [SDI 24PsF] item on the

setup menu [AV OUT SETUP] screen to [ON],
the frame rate function cannot be set.

Summary of Contents for AVCCAM AG-AC160EJ















































































































Search results

Summary of Contents for AVCCAM AG-AC160EJ

Reviews:

Related manuals for AVCCAM AG-AC160EJ

Brands by name

Popular brands

Panasonic AVCCAM AG-AC160EJ, Operating Instructions Manual

Search results

Summary of Contents for AVCCAM AG-AC160EJ

Reviews:

Related manuals for AVCCAM AG-AC160EJ

Brands by name

Popular brands