Panasonic AVCCAM AG-AC160EJ Page 79 Operating Instructions Manual Download

Page: 79 / 110

Displays

30 Information display

The following information is displayed
depending on the situation.

•

Performance of the auto white balance or the
auto black balance

•

Warning (Page 80)

•

The ND filter recommended under the current
shooting conditions is displayed.

•

The AWB error message ([LOW LIGHT]/
[LEVEL OVER]) (Page 21)

•

The functions assigned to the USER buttons
while you hold down the <DISP/MODE CHK>
button.

31 Time stamp display

Displayed when the [TIME STAMP] item on the
setup menu [RECORDING SETUP] screen is
[ON].

32 Audio level meter display (Page 43)
33 Auto iris control display

[

STD

Standard auto iris control

[

SPOT

Auto iris control for spotlight

[

BACK

Auto iris control for the backlight
compensation

34 IRIS METER display

Displays the preceding bar in the bottom right
of the LCD monitor/viewfinder.
Center: Indicates the normal light intensity.
Right:

Indicates high-light intensity.

Left:

Indicates low-light intensity.

Green dots on display:

Indicate the compensation amount
during AUTO IRIS.

35 Iris display

Displays F value.

36 Shutter speed display

Displays the shutter speed.

37 Monitor audio level meter

When you press the <AUDIO MON/ADV>
button, the sound volume output from the built-
in speaker and headphone jack is displayed.

38 DV control device status display (DV mode

only)

Displays the status of the device connected to
the <DV OUT> terminal.
[   ] (red): Shooting
[   ] (red): Shooting paused
[

Device cannot be controlled or
cannot be in shooting/shooting
pause status

[ ]:

Device is not connected

39 Recording aspect display (DV mode only)

Displayed when recording aspect is set to
[LETTER BOX].

Summary of Contents for AVCCAM AG-AC160EJ















































































































Search results

Summary of Contents for AVCCAM AG-AC160EJ

Reviews:

Related manuals for AVCCAM AG-AC160EJ

Brands by name

Popular brands

Panasonic AVCCAM AG-AC160EJ, Operating Instructions Manual

Search results

Summary of Contents for AVCCAM AG-AC160EJ

Reviews:

Related manuals for AVCCAM AG-AC160EJ

Brands by name

Popular brands