Panasonic AVCCAM AG-AC160EJ Page 97 Operating Instructions Manual Download

Page: 97 / 110

Menu

[META DATA] screen (AVCHD mode only)

Item

Display

mode

Description of settings

[CARD READ] <CAMERA>

(AVCHD

mode only)

Loads the metadata recorded on the memory card into the camera.

[SLOT1] [SLOT2] [NO]

•

[NO FILE] is displayed when there is no metadata recorded on the memory

card.

[RECORD]

<CAMERA>

(AVCHD

mode only)

Sets whether to simultaneously record the metadata on a memory card as it is

loaded into the camera.

[ON]:

Records simultaneously.

[OFF]:

Does not record simultaneously.

[USER CLIP

NAME]

<CAMERA>

(AVCHD

mode only)

Sets [USER CLIP NAME] recording method.

[TYPE1]:

The user clip name is the same as the [CLIP NAME] if no

metadata is uploaded or if no uploaded data exists.

[TYPE2]:

The user clip name is the same as the [CLIP NAME] if no

combination of data and COUNT value is uploaded, or if no

uploaded data exists.

[META DATA

PROP]

<CAMERA>

(AVCHD

mode only)

Displays the metadata recorded in the unit.

[YES] [NO]

[CLIP

COUNTER RST]

<CAMERA>

(AVCHD

mode only)

Resets the COUNT value to 1.

[YES] [NO]

[META INIT

SET]

<CAMERA>

(AVCHD

mode only)

Initializes the metadata recorded in the unit.

All settings, including the [ON]/[OFF] setting for [RECORD] are cleared.

[YES] [NO]

is the factory default mode.

[OTHER FUNCTIONS] screen

Item

Display

mode

Description of settings

[IR REMOTE]

<CAMERA>

<PB>

Sets the operations of the supplied remote control unit.

[ON]:

Accepts commands from the remote control.

•

Note that if the same type of remote control is used near the

unit, the unit may receive commands from the other remote

control during shooting, for example, and suddenly operate in an

unexpected manner.

[OFF]:

Does not accept commands from the remote control.

[DV CONTROL] <CAMERA>

(DV mode

only)

Specifies the control method when a backup device is connected to the <DV

OUT> terminal for backup recording.

[OFF]:

Backup device is not controlled.

[EXT]:

Backup device controlled using <START/STOP> button. Note,

however, that recording on the camera is not performed.

[BOTH]:

Backup recording performed by the unit and the backup device.

[CHAIN]:

When the recording nears the end, recording on the backup device

which is on standby will automatically start.

is the factory default mode.

Summary of Contents for AVCCAM AG-AC160EJ















































































































Search results

Summary of Contents for AVCCAM AG-AC160EJ

Reviews:

Related manuals for AVCCAM AG-AC160EJ

Brands by name

Popular brands

Panasonic AVCCAM AG-AC160EJ, Operating Instructions Manual

Search results

Summary of Contents for AVCCAM AG-AC160EJ

Reviews:

Related manuals for AVCCAM AG-AC160EJ

Brands by name

Popular brands