Panasonic AU-V35LT1G, Operating Manual

Page: 146 / 214

– 146 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[KNEE]
(page 74)
[KNEE SW] Enables/disables knee operation.
[ON], [OFF]
f
Factory setting: [OFF]
[KNEE MODE] Sets the knee operation mode.
[D RANGE]: Determines the dynamic range that can be represented by the [KNEE SLOPE] value. The
dynamic range that can be represented does not change even if the [KNEE POINT] value changes.
[PRESS]: Determines the signal compression rate through the [KNEE SLOPE] value. The value of the
dynamic range that can be represented changes when the [KNEE POINT] value changes.
f
Factory setting: [D RANGE]
[KNEE POINT] Sets the position of the knee point.
[75%] - [109%] (1% step)
f
Factory setting: [85%]
[KNEE SLOPE] Sets the knee inclination.
[0] - [100]
f
Factory setting: [100]
[WHITE CLIP]
(page 75)
[SW] Switches the enable/disable of the white clip function.
[ON], [OFF]
f
Factory setting: [OFF]
[LEVEL] Sets the white clip function level.
[90%] - [109%]
f
Factory setting: [109%]
[DETAIL] [SW] Switches the enable/disable of the detail function.
[ON], [OFF]
f
Factory setting: [OFF]
[CORING] Sets the coring amount for the detail signal.
[0] - [60]
f
Factory setting: [1]
[MASTER LEVEL] Sets the effect level for the detail signal.
[ − 31] - [31]
f
Factory setting: [0]
[FREQUENCY] Sets the thickness of the detail.
[1] - [3]
f
Factory setting: [3]
[SKIN DETAIL]
(page 75)
[SW] Switches enable/disable of the skin tone detail function.
[OFF], [ON]
f
Factory setting: [OFF]
[TABLE SELECT] Selects the table for the skin tone detail.
[A], [B], [C], [A + B], [A + C], [B + C], [A + B + C]
f
Factory setting: [A]
[GET] Sets whether to register the screen center color as the color by which the skin tone detail is applied.
[EXECUTE], [CANCEL]
[ZEBRA SW] Sets whether to superimpose the zebra signal to the color by which the skin tone detail is applied.
[ON], [OFF]
f
Factory setting: [OFF]
[EFFECT LEVEL] Sets the effective level of the skin tone detail. The higher the value, the more significant the effect.
[0] - [31]
f
Factory setting: [16]
[DETECT TABLE] Selects the skin tone table of the subject that displays the skin tone detail.
[A], [B], [C]
f
Factory setting: [A]
[- I CENTER] Sets the center position of the upper I axis (setting the area that displays the skin tone).
[0] - [255]
f
Factory setting: [35]
[- I WIDTH] Sets the width of the area that displays the skin tone of the upper I axis that focus on [- I CENTER].
[0] - [255]
f
Factory setting: [55]
[- Q WIDTH] Sets the width of the area that displays the skin tone of the upper Q axis that focus on [- I CENTER].
[0] - [127]
f
Factory setting: [22]
[- Q PHASE] Sets the phase of the area that displays the skin tone regarding to the Q axis.
[0] - [255]
f
Factory setting: [0]
[CHROMA] [LEVEL] Sets the chroma level of P
R
and P
B
signals.
[OFF], [ − 99%] - [99%]
f
Factory setting: [0%]
[PHASE] Fine adjusts the chroma phase of P
R
and P
B
signals.
[ − 31] - [31]
f
Factory setting: [0]
[LINEAR MATRIX]
(page 77)
[SW] Enables/disables the linear matrix function.
[ON], [OFF]
f
Factory setting: [OFF]
[(R-G)_N] Adjusts the linear matrix.
[ − 127] - [127]
f
Factory setting: [0]