Panasonic AU-V35LT1G, Operating Manual, Page: 137 / 214

– 137 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[SLOPE-B] Sets the value of [SLOPE-B].
[0.50] - [2.00] (0.01 step)
f
Factory setting: [1.00]
[OFFSET-R] Sets the value of [OFFSET-R].
[ − 0.50] - [0.50] (0.01 step)
f
Factory setting: [0.00]
[OFFSET-G] Sets the value of [OFFSET-G].
[ − 0.50] - [0.50] (0.01 step)
f
Factory setting: [0.00]
[OFFSET-B] Sets the value of [OFFSET-B].
[ − 0.50] - [0.50] (0.01 step)
f
Factory setting: [0.00]
[POWER-R] Sets the value of [POWER-R].
[0.50] - [2.00] (0.01 step)
f
Factory setting: [1.00]
[POWER-G] Sets the value of [POWER-G].
[0.50] - [2.00] (0.01 step)
f
Factory setting: [1.00]
[POWER-B] Sets the value of [POWER-B].
[0.50] - [2.00] (0.01 step)
f
Factory setting: [1.00]
[SATURATION] Sets the value of [SATURATION].
[0.00] - [2.00] (0.01 step)
f
Factory setting: [1.00]
[R GAIN] Adjusts the gain of Rch when [GRADING] is set to [SHADING].
[ − 200] - [ + 200] (1 step)
f
Factory setting: [0]
[G GAIN] Adjusts the gain of Gch when [GRADING] is set to [SHADING].
[ − 200] - [ + 200] (1 step)
f
Factory setting: [0]
[B GAIN] Adjusts the gain of Bch when [GRADING] is set to [SHADING].
[ − 200] - [ + 200] (1 step)
f
Factory setting: [0]
[M.PED] Adjusts the level of the master pedestal when [GRADING] is set to [SHADING].
[ − 100] - [ + 100] (1 step)
f
Factory setting: [0]
[R PED] Adjusts the pedestal level of Rch when [GRADING] is set to [SHADING].
[
−
100] - [
+
100]
(1 step)
f
Factory setting: [0]
[G PED] Adjusts the pedestal level of Gch when [GRADING] is set to [SHADING].
[ − 100] - [ + 100] (1 step)
f
Factory setting: [0]
[B PED] Adjusts the pedestal level of Bch when [GRADING] is set to [SHADING].
[
−
100] - [
+
100]
(1 step)
f
Factory setting: [0]
[MASTER GAMMA] Adjusts the gamma characteristic when [GRADING] is set to [SHADING].
[ − 50] - [ + 50] (1 step)
f
Factory setting: [0]
[R GAMMA] Adjusts the gamma characteristic of the red against the master gamma when [GRADING] is set to
[SHADING].
[ − 15] - [ + 15] (1 step)
f
Factory setting: [0]
[B GAMMA] Adjusts the gamma characteristic of the blue against the master gamma when [GRADING] is set to
[SHADING].
[ − 15] - [ + 15] (1 step)
f
Factory setting: [0]
[CHROMA LEVEL] Adjust the chroma level of the P
R
signal and the P
B
signal when [GRADING] is set to [SHADING].
[
−
99%] - [99%]
f
Factory setting: [0%]
[ANAMORPHIC
DESQUEEZE]
[PROXY & SDI OUT] Sets if the video to be recorded in the proxy and the SDI output video is to be de-squeezed.
[ON], [OFF]
f
Factory setting: [OFF]
[VF SDI] Sets if the output video from the <VF SDI> terminal is to be de-squeezed.
[ON], [OFF]
f
Factory setting: [OFF]
[DESQUEEZE RATIO] Sets the de-squeeze ratio.
[1.3x]: De-squeeze 1.3 times in horizontal direction.
[1.3xmag]:
It will be in aspect ratio of 2.39:1 for mastering generated from the image de-squeezed 1.3
times in horizontal direction.
[2.0x]:
De-squeeze 2.0 times in horizontal direction.
[2.0xmag]: It will be in aspect ratio of 2.39:1 for mastering generated from the image de-squeezed 2.0
times in horizontal direction.
f
Factory setting: [1.3x]