Panasonic AU-V35LT1G, Operating Manual, Page: 14 / 214

– 14 –
Chapter 2 Description of Parts — Electronic HD color view finder
Electronic HD color view finder
Left side
1
2
3
4
5 6 7
1 <EVF USER 1>/<EVF USER 2> buttons
User-selected functions can be assigned to each button. Pressing a button performs the assigned function. Functions are set on the viewfinder
menu.
2 <CAM MENU> button
Displays the camera menu screen.
3 <EVF MENU> button
Displays the viewfinder menu screen.
4 Jog dial
Operation dial.
Used for setting, moving, and selecting in menus.
5 Zoom ring
Ring which enlarges/reduces the size of the viewfinder display screen.
This is used to enlarge the display when adjusting the focus. When the display is enlarged, some parts of the video may be hidden.
6 Visibility adjustment ring
Ring which adjusts the visibility. Turn this ring while pressing and holding the upper button.
7 Eye cup
Front
1
3
2
1 Tally LED
Lights up in red during recording or when red tally signals are received. This can be disabled in the viewfinder menu.
2 Video signal input terminal
An input terminal for 3G/HD-SDI video signal input.
Use the supplied BNC cable or the 5C-FB equivalent double-shielded cable for the cable to connect to this terminal.
3 <DC IN 12V> terminal
An input terminal for power supply input.
Connect to the electronic HD color view finder power supply terminal on the camera.
Use the supplied DC cable when connecting a cable to this terminal.
Using the external DC power supply
To use it by itself, connect the <DC IN 12V> terminal of the camera to the external DC power supply.
r
External DC power supply
Connect after making sure that the output voltage of the external DC power supply is compatible with the rated voltage of the camera.
When the power of the camera is turned on, inrush current is generated. Insufficient power supply when turning on the power may cause a malfunction. Use of
the external DC power supply that can secure power more than twice the total power consumption of the camera is recommended.
f
Make sure of the pin alignment of the DC output terminal of the external DC power supply and the camera <DC IN 12V> terminal, and connect the polarity
correctly.
Connecting the GND terminal to
+ 12 V power supply by mistake may cause fire or malfunction.