Panasonic AU-V35LT1G, Operating Manual

Page: 143 / 214

– 143 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[GAIN SELECT] Sets the value when [dB] is selected.
[ − 12dB], [ − 10dB], [ − 8dB], [ − 6dB], [ − 4dB], [ − 2dB], [0dB], [2dB], [4dB], [6dB], [8dB], [10dB], [12dB],
[14dB]
When [GAMMA] → [GAMMA SELECT] is set to [VIDEO45]/[VIDEO50]/[BC GAMMA].
This will be set to [ − 6dB], [ − 4dB], [ − 2dB], [0dB], [2dB], [4dB], [6dB], [8dB], [10dB], [12dB], [14dB], [16dB],
[18dB], or [20dB].
This will be [ − 6dB], [ − 4dB], [ − 2dB], [0dB], [2dB], [4dB], [6dB], [8dB], [10dB], [12dB], or [14dB] when [MAIN
CODEC] is set to [AVC-Intra2K-LT]/[AVC-Intra-LT], and [MAIN PIXEL] is set to [2048 × 1080 CROP]/
[1920 × 1080 CROP].
f
Factory setting: [0dB]
[SHUTTER] [SW] Enables/disables the shutter function.
[ON], [OFF]
f
Factory setting: [ON]
[DISPLAY MODE] Sets the shutter display unit.
[sec]: Displays in time.
[deg]: Displays at shutter open angle.
f
Factory setting: [deg]
[VALUE deg] Selects the angle control ([deg]) value from the maximum of 12 registered values.
Preset values that can be selected in the factory settings are [11.5d], [22.5d], [45.0d], [90.0d], [120.0d],
[144.0d], [172.8d], [180.0d], [270.0d], and [358.0d].
f
Factory setting: [180.0d]
[VALUE sec] Selects the time control ([sec]) value from the maximum of 12 registered values.
Preset values that can be selected in the factory settings are [1/60.0], [1/100.0], [1/120.0], [1/250], [1/500],
[1/1000], and [1/2000].
f
Factory setting: [1/60.0]
[ADD deg] Newly registers the angle control ([deg]) value to the list.
Newly registered value can be selected with [VALUE].
It will replace the currently selected value when there are 12 numbers registered already.
[ADD sec] Newly registers the time control ([sec]) value to the list.
Newly registered value can be selected with [VALUE].
It will replace the currently selected value when there are 12 numbers registered already.
[DELETE deg] Deletes the angle control ([deg]) value from the list.
Deletion is not possible when there is only one registered value.
[YES], [NO]
[DELETE sec] Deletes the time control ([sec]) value from the list.
Deletion is not possible when there is only one registered value.
[YES], [NO]
[LENS SETTING] [LENS CONNECT
TYPE]
Sets the type of lens to be connected.
[EF]: Lens controlled with EF
[LDS]: Lens controlled with LDS (Lens Data System)
[B4]: Lens controlled with 12-pin connector
[Cooke-i]:
Lens controlled with cooke/i communication
[OFF]: Other lenses
f
Factory setting: [EF]
[A.IRIS TYPE] Sets the location to control the speed of the auto iris when [LENS CONNECT TYPE] is set to [B4].
[LENS]:
Lens volume
[CAM]: Set with [A.IRIS SPEED]
f
Factory setting: [LENS]
[A.IRIS SPEED] Sets the speed of the auto iris when [LENS CONNECT TYPE] is set to [B4] and [A.IRIS TYPE] is set to
[CAM].
[1] - [20]
f
Factory setting: [10]
[A.IRIS LEVEL EFFECT] Sets the target value during auto iris operation.
[0] - [100]
f
Factory setting: [50]
[A.IRIS WINDOW] Selects the auto iris detection window.
[NORMAL1]:
Window that is near screen center.
[NORMAL2]: Window that is near screen bottom.
[CENTER]:
Window that is a spot in the screen center.
f
Factory setting: [NORMAL1]
[A.IRIS PEAK/AVE] Sets the ratio included in the peak for auto iris standard.
[0] - [100]
f
Factory setting: [30]
[ONE PUSH A. IRIS] Executes the one-push auto iris.
[EXECUTE], [CANCEL]
[EF LENS IRIS MODE] Sets the operation of the iris when [EF] is selected.
[MANUAL]: Manual control
[AUTO]: Auto control
f
Factory setting: [MANUAL]
[GRIP IRIS] Sets the turning direction of the <IRIS> dial and the iris control of the grip module.
[RIGHT OPEN]: The iris will open when the <IRIS> dial is turned clockwise.
[LEFT OPEN]: The iris will open when the <IRIS> dial is turned counterclockwise.
f
Factory setting: [RIGHT OPEN]