– 22 –
Chapter 2 Description of Parts — Camera
13 Power lamp
Indicates the status of power. Illuminates in red when the power is on.
To flash the lamp or not can be set in the menu.
14 Built-in speaker
Outputs audio during playback.
Audio is not output from the built-in speaker when headphones are connected to the headphone terminal.
15 USER buttons (<USER 1>, <USER 2>/<VIEW>, <USER 3>/<INFO>)
A function selected by the user can be assigned to each button. Pressing the button while the VIEW screen is displayed will perform the assigned
function.
Pressing the button while displaying the HOME screen will perform the operation of the <VIEW>/<INFO> button displayed in orange in the camera.
Pressing the <VIEW> button will display the VIEW screen, and pressing the <INFO> button will display the INFO screen.
16 <E.I.S.>/<USER 4> button
Enables/disables the electronic image stabilization function.
Also, this is also used as the USER button (USER4).
17 <WFM>/<USER 5> button
Displays/hides the waveform monitor displayed on the LCD monitor.
Also, this is also used as the USER button (USER5).
18 <LOCK> switch
Sliding toward the < > side disables the operations other than the power switch.
Sets the button and switch to disable the operation in the [SYSTEM SETTINGS] menu
→
[SIDE LOCK].
19 <WB>/<USER>/<ISO/dB> switch
Use by switching between <WB> (white balance)/<USER> (USER button)/<ISO/dB> (gain adjustment) functions.
The selected function is operated with the multidial.
20 Multidial
Moves, selects, and sets the menu while the menu is displayed.
Also, operates the selected function with the <WB>/<USER>/<ISO/dB> switch.
21 <EXIT> button
Returns to one level higher when the menu is displayed. Pressing the <EXIT> button without confirming the setting value will not reflect the change
in the setting.
22 <HOME> button
Displays the HOME screen on the LCD monitor.
23 <THUMBNAIL> button
Displays the thumbnail screen on the LCD monitor.
Pressing the <THUMBNAIL> button again displays the VIEW screen.
24 Power switch
Switches between power on/standby.
To turn on, set the power switch to < > (ON). To set to standby, set the power switch to < > (standby).
Front side
5
6
2
3
1
4
1 Light sensor
Detects indoor and outdoor light.
When using the auto tracking white balance (ATW), do not obstruct the light sensor.
2 Built-in microphone
This is the built-in stereo microphone <L>/<R>.
