9 – 85
Aquarea air/water heat pump – Installation manual for monobloc and split systems C, D and E series 05 / 2014
9
Commis
-
sioning
Commissioning
Programming
Setting the weekly timer
➤
Open the timer by pressing the TIMER button .
➤
Set the date and time .
➤
Press the UP or DOWN button until the required weekday is
displayed .
➤
Press the SELECT button to confirm the setting .
➤
“1” flashes on the display . Press the SELECT button to set
Program 1 .
➤
Press the OFF / ON button
to select the activation/deactivation timer .
➤
Use the UP or DOWN buttons to set the required time .
In addition to the switching time, you can also set other modes
using the MODE or QUIET buttons .
➤
Press the SET button to confirm Program 1 . The weekday selected
is identified with the symbol .
After 2 seconds, the display switches to the next program .
➤
Repeat the above steps, starting with the OFF / ON button, to set
programs 2 to 6 .
If no buttons are pressed for 30 seconds during timer setting,
or if you press the SET button, the current setting is saved and
the setting process is closed .
SET
SELECT
SETTING
OFF/ON
WATER OUTLET
TIMER
OUTDOOR
ACTUAL
HEATER
SETTING
STATUS
SERVICE
DEFROST
HEAT
COOL
TANK
QUIET
HEATER
FORCE
BOOSTER
STATUS
SEARCH
CANCEL
CLOCK
FORCE SERVICE
ERROR
RESET
OFF/ON
QUIET
HEATER
MODE
CHECK
TIMER
OPERATION
SET
SELECT
SETTING
STATUS
SEARCH
CANCEL
CLOCK
FORCE
ERROR
RESET
PUMPDW
OFF/ON
QUIET
HEATER
MODE
CHECK
TIMER
Setting the weekly timer
