7 – 47
Aquarea air/water heat pump – Installation manual for monobloc and split systems C, D and E series 05 / 2014
7
Hydraulic &
refr
ig. circuits
Installation of heating and refrigeration circuits for split systems
Connecting the hydro module and the outdoor unit (refrigerant circuit)
7.4 Connecting the hydro module and the outdoor unit (refrigerant circuit)
Danger!
The work may only be performed by qualified or certified personnel .
Ensure that the device is disconnected from the power supply before
you perform the steps listed below .
1
Panelling board
2
Pipe covers
➤
Open the outdoor unit as described in section 5 .1 .
➤
Remove the selected pipe cover and drill the appropriate holes for
the pipelines in it .
➤
Mount the pipe cover again to prevent rain entering the outdoor unit .
2
1
Note
The pipelines can be connected
to the device in four directions .
