Panasonic ANUJ3000, User Manual

Page: 52 / 69

External control
42
4
）
“Cumulative irradiation time (×100hrs)”… To set the cumulative irradiation time
(*During setting “Cumulative irradiation time (×100hrs)” is highlighted.)
・
Read
Reads the current value of cumulative irradiation time from the UJ35 controller into the PC.
・
Write Uploads the current cumulative irradiation time from the PC to the UJ35 controller.
・
Cancel Cancels the current cumulative irradiation time setting operation and reverts to
the original settings.
[Settings 2]
1) “Set MODE”… To switch the mode of the controller
(*While changing mode settings, the modes, “TEMP,” “OUTPUT,” and “Buzzer OFF” are highlighted.)
・
[TEMP] Switches head temperature display between °C/°F.
・
[OUTPUT] Switches external output signals between READY/BUSY.
・
[Buzzer OFF] Switches the buzzer ON/OFF for each operation.
・
Read Reads the MODE settings from the UJ35 controller into the PC.
・
Write Uploads the MODE settings from the PC to the UJ35 controller.
・
Cancel Cancels the current MODE setting operation and reverts to
the original settings.