Panasonic ANUJ3000, User Manual

Page: 29 / 69

Operation modes
19
6.3 Default settings mode
This mode is used for the units (°C/°F) for head temperature readings, for switching between
READY/BUSY signal, and for setting the buzzer ON/OFF.
* The default values are Celsius (°C) for temperature display, BUSY, and buzzer ON.
[Default settings mode]
1. While pressing down the MODE switch power ON the controller.
2. When the display starts up is displayed.
[Switching between °C/°F display]
1. Use
△
/
▽
to switch between °C (Celsius)/°F (Fahrenheit).
2. Press the SET switch. will be displayed.
[Switching between READY/BUSY signal]
1. Use
△
/
▽
to switch between A=READY/b=BUSY.
2. Press the SET switch. will be displayed.
[Switching the buzzer ON/OFF]
1. Use
△
/
▽
to switch between buzzer ON/OFF.
2. Press the SET switch. will be displayed.
[Exiting from default settings mode]
1. Hold down the SET switch to switch to operation mode.
[Restoring default settings
(all settings are restored to their initial default values)]
1. While in default settings mode, press the MODE switch.
2. will be displayed.
3. Hold down
△
/
▽
.
4. will be displayed.
5. Hold down SET. will be displayed. When
appears all settings have been restored to their original
default values, and the controller returns to operation mode.
3 On/oFF
EE | | |
EE
EE CLr
1 C/F
2 A/b
1 C/F